Logging

Broadly, there are two types of logs you may be interested in. On cluster for the applications you are running inside your cluster, and at an infrastructure level for the applications which are responsible for running the cluster itself.

As Charmed Kubernetes is pure Kubernetes, you can use any of the tools and techniques to examine cluster logs as described in the Kubernetes documentation. Security related logging is enabled by default and is described in more detail in the Audit logging section. Additionally, you can deploy Graylog alongside your cluster - please see the section on Graylog below.

For the infrastructure, your Charmed Kubernetes deployment has centralised logging set up by default. Each unit in your cluster automatically sends logging information to the controller based on the current logging level. You can use the Juju command line to easily inspect these logs and to change the logging level, as explained below.

Viewing logs

To view the logs from the current controller and model, simply run:

juju debug-log

The default behaviour is to show the last 10 entries and to tail the log (so you will need to terminate the command with Ctrl-C).

The output is in the form:

<entity> <timestamp> <log-level> <module>[:<line-no>] <message>

For example, a typical line of output might read:

unit-kubernetes-control-plane-0: 18:04:11 INFO juju.cmd running jujud [2.4.2 gc go1.10]

The entity is the unit, machine or application the message originates from (in this case kubernetes-control-plane/0). It can be very useful to filter the output based on the entity or log level, and the debug-log command has many options.

For a full description, run the command juju help debug-log or see the Juju documentation. Some useful examples are outlined below.

Useful examples

View the last 100 entries and tail the log:

juju debug-log -n 100

Show the last 20 entries and exit:

juju debug-log -n 20 --no-tail

Replay the log from the very beginning, but filter to logs from kubernetes-worker/0:

juju debug-log --replay --include=kubernetes-worker/0

Viewing logs on a machine

If it becomes necessary for any reason, it is also possible to view logs directly on the running machine. A user with SSH access can connect to the relevant machine and find the logs for all the units running on that machine in the directory /var/logs/juju. The juju ssh command can be used for this, and you can connect to the relevant machine using a unit identifier. So for example, to look at the logs on the machine running the first unit of kubernetes-worker you can run the following:

juju ssh kubernetes-worker/0
ls /var/logs/juju/

Which should show something similar to:

machine-1.log  machine-lock.log  unit-flannel-1.log  unit-kubernetes-worker-0.log

Note that the logs from other units (in this case 'flannel') running on this machine can also be found here.

Logging level

You can check the current logging level by running the command:

juju model-config logging-config

This will result in output similar to:

<root>=WARNING;unit=DEBUG

...which is the default for any Juju model. This indicates that the machine log level is set to 'WARNING', and the unit logging level is set to 'DEBUG'. As all the software components of your kubernetes cluster run in units, these logs are likely to be useful for diagnosing issues with software.

The logging levels, from most verbose to least verbose, are as follows:

TRACE
DEBUG
INFO
WARNING
ERROR

The logging level can be set like this:

 juju model-config logging-config="<root>=WARNING;unit=TRACE"

...which in this case sets the logging level for all units to TRACE

Caution!

It isn't a good idea to leave the logging level at 'TRACE' for any longer than you actually need to. Verbose logging not only consumes network bandwidth but also fills up the database on the controller.

Additional information

As previously mentioned, you can see more detailed information on accessing the logs from your cluster in the Juju documentation, including the following:

Altering the agent logging setup
Setting up remote logging
More advanced filtering and additional examples

Cluster logs with Graylog

The recommended way to retrieve logs from your cluster is to use a combination of Elasticsearch, Graylog and Filebeat. These provide a dashboard from which you can monitor both machine-level and cluster-level logs.

Installation

You can install Charmed Kubernetes with Graylog logging using the Juju bundle along with the following overlay file (download it here):

applications:
  apache2:
    charm: apache2
    num_units: 1
    expose: true
    options:
      enable_modules: "headers proxy_html proxy_http"
  elasticsearch:
    charm: elasticsearch
    constraints: mem=7G root-disk=16G
    num_units: 1
    options:
      apt-repository: "deb https://artifacts.elastic.co/packages/6.x/apt stable main"
  filebeat:
    charm: filebeat
    options:
      install_sources: "deb https://artifacts.elastic.co/packages/6.x/apt stable main"
      kube_logs: True
  graylog:
    charm: graylog
    constraints: mem=7G root-disk=16G
    num_units: 1
    options:
      channel: "3/stable"
  mongodb:
    charm: mongodb
    num_units: 1
    options:
      extra_daemon_options: "--bind_ip_all"
relations:
  - ["apache2:reverseproxy", "graylog:website"]
  - ["graylog:elasticsearch", "elasticsearch:client"]
  - ["graylog:mongodb", "mongodb:database"]
  - ["filebeat:beats-host", "kubernetes-control-plane:juju-info"]
  - ["filebeat:beats-host", "kubernetes-worker:juju-info"]
  - ["filebeat:logstash", "graylog:beats"]

To use this overlay with the Charmed Kubernetes bundle, specify it during deploy like this:

juju deploy charmed-kubernetes --overlay logging-egf-overlay.yaml

If you wish to add Graylog logging to an existing deployment, you can export a bundle of your current environment and then redeploy it on top of itself with the overlay:

juju export-bundle --filename mybundle.yaml
juju deploy ./mybundle.yaml --overlay logging-egf-overlay.yaml

At this point, all the applications can communicate with each other. To enable the Graylog web interface, configure the reverse proxy with the following template (download it here):

<Location "/">
    RequestHeader set X-Graylog-Server-URL "http://{{servername}}/"
    ProxyPass http://{{graylog_web}}/
    ProxyPassReverse http://{{graylog_web}}/
</Location>

Use the above template to configure apache2 like this:

juju config apache2 vhost_http_template="$(base64 graylog-vhost.tmpl)"

Using Graylog

Now that we have everything configured, you'll need to know the web server IP address and Graylog admin password so you can login:

juju status --format yaml apache2/0 | grep public-address
    public-address: <your-apache2-ip>
juju run graylog/0 show-admin-password
    admin-password: <your-graylog-password>

Browse to http://<your-apache2-ip> and login with admin as the username and <your-graylog-password> as the password.

Note:

If the interface is not immediately available, please wait as the reverse proxy configuration may take up to 5 minutes to complete.

Once logged in, head to the Sources tab to get an overview of the logs collected from our K8s master and workers:

Screen Shot of graylog

Drill into those logs by clicking the System / Inputs tab and selecting Show received messages for the filebeat input:

Screen Shot of graylog

From here, you may want to explore various filters or setup Graylog dashboards to help identify the events that are most important to you. Check out the Graylog Dashboard docs for details on customising your view.

We appreciate your feedback on the documentation. You can edit this page or file a bug here.

See the guide to contributing or discuss these docs in our public Mattermost channel.