Your submission was sent successfully! Close

Thank you for contacting us. A member of our team will be in touch shortly. Close

You have successfully unsubscribed! Close

Thank you for signing up for our newsletter!
In these regular emails you will find the latest updates about Ubuntu and upcoming events where you can meet our team.Close

How to use Charmed Kubernetes addon Operator Charms

This page gives step by step guides for deploying the Operator Charm versions of the Charmed Kubernetes addons. For an explanation of these addons, please see the addons page.

Steps for all addons

In order for Juju to deploy Kubernetes applications, it will need to fetch information and be configured to work with your Kubernetes cluster. These steps assume:

  • You have administrative access to the Charmed Kubernetes cluster.
  • Your Charmed Kubernetes is running in a model called 'ck-model'. Replace this term in the commands listed for a different model name.
  • Your Juju controller is running on version 2.9.30+. See instructions for upgrading a controller below.

1. Confirm your Juju controller is up to date

Before creating and using a Kubernetes model, it is recommended to upgrade the controller model to the lastest version:

juju upgrade-model -m controller

2. Install kubectl

You will need kubectl to be able to use your Kubernetes cluster. If it is not already installed, it is easy to add via a snap package:

sudo snap install kubectl --classic

For other platforms and install methods, please see the [Kubernetes documentation][kubectl].

3. Retrieve the required configuration

Juju makes use of the kubectl config file to access the Kubernetes cluster. For Linux-based systems, this file is usually located at ~/.kube/config

If you are already using kubectl to access other clusters you may wish to merge the configurations rather than replacing it. The following command fetches the config file for kubectl from the Kubernetes cluster and saves it to the default location:

juju ssh kubernetes-control-plane/leader -- cat config > ~/.kube/config

4. Add the Kubernetes cluster to Juju

Next, add your Kubernetes cluster as a cloud to your current Juju controller:

juju add-k8s ck8s --controller $(juju switch | cut -d: -f1)

You may replace ck8s with whatever name you want to use to refer to this cloud, but remember to substitute in the correct name in the remaining examples in this page.

Note:

Some operator charms may require access to storage. Please make sure your Kubernetes cluster has access to a storage class accessible to the deployed applications.

5. Add a model

To be able to deploy operators you will also need to create a Juju model in the cloud:

juju add-model k8s-model ck8s

Again, you should replace k8s-model with a name you want to use to refer to this Juju model. As well as creating a Juju model, this action will also create a Kubernetes namespace of the same name which you can use to easily monitor or manage operators you install on the cluster.

6. Switching between models

Juju will automatically "switch" to the new Kubernetes model you just created.

Most of the instructions for the add-on components here require commands to be run in the model where Charmed Kubernetes is running and also in the model created on the Kubernetes cloud (which we have called ck8s in this page). Use the Juju switch command to see the currently available models:

juju switch

If you followed the example naming scheme, you should see something like this:

juju models
Controller: vs-bos

Model       Cloud/Region           Type        Status     Machines  Cores  Units  Access  Last connection

ck-model         vsphere-boston/Boston  vsphere     available        11     18  21     admin   29 minutes ago
controller  vsphere-boston/Boston  vsphere     available         1      -  -      admin   just now
k8s-model*   ck8s/default          kubernetes  available         0      -  -      admin   never connected

In the above case, there are three models available to the current controller. One is the model created by the controller itself ("controller"), one is the model where Charmed Kubernetes is installed (in this case, it was called "ck-model") and the final one, which has an asterisk to indicate it is the current model, is the one we just created. If you chose poor names or get confused between many different models, it is helpful to note that the "Type" field shows the underlying cloud type, so your kubernetes clouds are easier to spot.

To switch to the model which contains the CK cluster, we can run:

juju switch ck-model

...and to switch back to the model in the Kubernetes cloud:

juju switch k8s-model

CoreDNS

CoreDNS is sourced from: https://github.com/coredns/deployment.git

CoreDNS has been the default DNS provider for Charmed Kubernetes clusters since 1.14.

For additional control over CoreDNS, you can also deploy it into the cluster using the CoreDNS Kubernetes operator charm, as described below.

1. Disable in-tree CoreDNS

You will need access to the Juju model running Charmed Kubernetes (NOT the kubernetes cloud) and turn off the built-in DNS provider

juju switch ck-model

(replace "ck-model" with the model contianing Charmed Kubernetes)

With the Charmed Kubernetes model selected from Juju, run:

juju config kubernetes-control-plane dns-provider=none

2. Deploy the CoreDNS operator

Switch back to the Kubernetes cloud:

juju switch k8s-model

...and deploy the operator charm:

juju deploy coredns --channel=latest/stable --trust

You can check on the status of this deployment using the command:

kubectl get -n 'k8s-model' po

3. Configure Charmed Kubernetes to use this DNS

Although the 'k8s-model' is running on top of the components installed in 'ck-model', they are considered to be separate entities. To use an application running in one model from a different model, Juju supports 'cross-model relations'. There are a few extra commands to enable this.

juju switch k8s-model
juju offer coredns:dns-provider

The offer command exposes the Juju relation for use in a different model. In the above, we expose the dns-provider relation endpoint.

To connect to that, switch models and use the consume command:

juju switch ck-model
juju consume k8s-model.coredns

The consume command is the counterpart to offer. It establishes a connection to the specified model and application, and adds that resource to the current model. A running application in the model can then be related to it as thought it were a local model resource. In this case you want to connect it to the kubernetes-control-plane:

juju integrate -m ck-model coredns kubernetes-control-plane

Once everything settles, new or restarted pods will use the CoreDNS charm as their DNS provider. The CoreDNS charm config allows you to change the cluster domain, the IP address or config file to forward unhandled queries to, add additional DNS servers, or even override the Corefile entirely.

For more details, see the CoreDNS charm documentation

Kubernetes Dashboard

Sourced from: https://github.com/kubernetes/dashboard.git

The Kubernetes Dashboard is a standard and easy way to inspect and interact with your Kubernetes cluster. The dashboard operator charm

1. Disable the in-tree dashboard

Targeting the underlying cluster model ('ck-model' as used in these examples):

juju config kubernetes-control-plane enable-dashboard-addons=false

2. Deploy the Dashboard charm

For additional control over the Kubernetes Dashboard, you can also deploy it into the cluster using the Kubernetes Dashboard operator charm. To do so, set the enable-dashboard-addons kubernetes-control-plane configuration option to false and deploy the charm into a Kubernetes model on your cluster:

juju switch k8s-model
juju deploy kubernetes-dashboard --channel=latest/stable --trust

3. Accessing the Dashboard

Allow the new dashboard time to settle - it needs to fetch and install various images and could take a few minutes depending on the underlying cloud.

Access to the Kubernetes Dashboard works as before. Please use the instructions in the Operations page.

Metrics

The metrics addon consists of two services, Kube State Metrics and Kubernetes Metrics Server. Both of these can be replaced by charm operators as detailed below.

Before deploying the new charms, you should turn off the built-in metrics features:

juju switch ck-model
juju config kubernetes-control-plane enable-metrics=false

1. Kube-State Metrics

Sourced from: https://github.com/kubernetes/kube-state-metrics.git

Kube-State-Metrics is a service which listens to the Kubernetes API server and generates metrics about the state of the objects. It is focused on the health of the various objects running inside kubernetes, such as deployments, nodes and pods.

Deploy the [kube-state-metrics-operator][] charm into this kubernetes model with:

juju deploy kube-state-metrics --trust

If you have a prometheus application running in the same model, it can also be related to this:

juju integrate kube-state-metrics prometheus

2. Kubernetes Metrics Server

The Kubernetes Metrics Server collects resource metrics from Kubelets and exposes them in the Kubernetes apiserver through Metrics API for use by the Horizontal Pod Autoscaler and Vertical Pod Autoscaler. The Metrics API can also be accessed by kubectl top, making it easier to debug autoscaling pipelines.

Since version 1.24, the metrics-server can be deployed into the cluster just like any other kubernetes application.

Firstly, ensure that the API aggregation is turned on

juju switch ck-model
juju config kubernetes-control-plane api-aggregation-extension=true

Then deploy the Kubernetes Metrics Server charm:

juju switch k8s-model
juju deploy kubernetes-metrics-server

Some of the new configuration options available through this charm are:

  • upgrade the release of the metrics-server via config
    juju config kubernetes-metrics-server release="v0.6.0"
  • adjust the base image registry if the cluster demands a private registry
    juju config kubernetes-metrics-server image-registry="my.registry.server:5000"
  • adjust the arguments of the running service
    juju config kubernetes-metrics-server extra-args="--kubelet-insecure-tls"